Product Description
DW VB40AX2 Dual Pump 40 Amp Voltage Booster
Free shipping!
From Deatschwerks:
The DeatschWerks VB40a brings fuel pump voltage boosting to an entirely new level. The industry's first pump booster with digital programing, password protection, and a special brushless pump mode that allows voltage output up to 26 volts. The VB40a is universally compatible with all makes and models and is available in both single pump and dual pump versions.
- Single and Dual Pump Models (X1 and X2)
- Standard mode up to 20 volts
- Brushless mode up to 26 volts
- Programing via roller wheel and digital screen
- User defined passcode protection
Weight: 2.5 lbs. (1120 g)
Housing Materials: Anodized Aluminum Case
Display Materials: OLED Screen
Input Voltage: 6.0 - 14.5 Volts
Output Volt (Standard Mode): 14.5 - 20 Volts
Output Volt (Brushless Mode): 14.5 - 26 Volts
Max Current: 40 Amps
Voltage Settings: 14.5, 18, 20, 22, and 26 Volts
Trigger Modes: Active Low and Always On
Ramp Rates (Sec): Auto, 1.5, 1.0, 0.5 and Instant
Compatible Pumps: Brushed and Brushless
VB40a Wiring: 24" (610mm) 10awg
Output Wiring: 36" (915mm) 10awg
Trigger Wiring: 36" (915mm) 14awg
Fuse(s): ATO 50 Amp
VB40a Power: Red Wire, 12v Key On
VB40a Ground: Black Wire, Chassis Ground
Trigger: White Wire, Switched Ground
Fuel Pump Power: Blue Wire, To Fuel Pump
* X1 or X2: Do not exceed 40amp total Fuel Pump current draw
* Always On Setting Is Limited to 18V Only
* VB40aX2 Has Two Power (Red) and two Pump Wires (Blue)
Boost the Power, Boost the Performance
Get More from Your Existing Fuel Pump
- Most advanced pump voltage booster on the market
- Compatible with in-tank, in-line, brushed, and brushless fuel pumps
- Dedicated brushless mode maximizes brushless pump performance
- Intuitive programming via roller wheel and OLED screen
- User defined pass code protection
- Single and dual pump models (X1 and X2)
- Brushed mode up to 20v and Brushless mode up to 26v
- Adjustable ramp rate to avoid fuel pressure spike
- 6160 T6 aluminum case with integrated finned heat sinks
- Compatible with DW brushless controllers
- Endurance tested to 40amps RMS
*26v on brushless pumps
