Product Description
American Racing Solutions HEMI Street Performance Tensioner
From American Racing Solutions:
5.7, 6.1 & 6.4L HEMI Street Performance Belt Tensioner
2004 – 2017
Designed as a direct bolt on replacement for the stock tensioner
If you are running a supercharged Charger, Challenger, Grand Cherokee, then you know that your factory belt tensioner was not designed to stand up to the stress and strain of the added HP and Torque, especially if you are racing. Our Street Performance Tensioner is fabricated from 6061-T6 Billet Aluminum, not cast, and features nearly 2x the spring tension vs. the stock item. Internal components include a TGP shaft, hardened bushings, proprietary spring, and thrust bearings make this the strongest and smoothest belt tensioner on the market. It has been tested and proven on the DYNO and the Track and will reduce if not eliminate belt slip, which will increase boost and HP. Best of all, it is a direct bolt-on replacement for the stock unit, no brackets, fittings or adaptors are needed. Recommended for cars making up to 700 HP. We are so confident that our tensioner will not bend or break that we will guarantee it for life.
38 LB Spring
Part/Model #: ARS6380A
Billet Aluminum
Clear Anodized
Supplied with 70mm clear anodized billet pulley and mounting bolt
Upgrade your pulley to Ceramic Bearings!
Serious racers are constantly pushing the envelope and everyone knows that shaving off .001’s of a second from their ET which translates into more win lights.
Ceramic hybrid bearings use ceramic balls and steel races. Ceramic balls weigh up to 40% less than steel balls, depending on size. This reduces centrifugal loading and skidding, so hybrid ceramic bearings can operate up to 50% faster than conventional bearings. This means that the outer race groove exerts less force inward against the ball as the bearing spins. This reduction in force reduces the friction and rolling resistance. The lighter ball allows the bearing to spin faster, and uses less energy to maintain its speed.
Ceramic silicon nitride balls exhibit much greater hardness than steel balls resulting in at least 10 times greater ball life due to the ability to hold the surface finish longer. The ball has dramatically smoother surface properties than the best steel ball resulting in less friction between the balls and bearing race surfaces. Thermal properties are also dramatically improved over steel balls resulting in less heat buildup at high speeds. Ceramic has 35 percent less thermal expansion, 50 percent less thermal conductivity, are lighter weight and are non-corrosive.
We are so confident that our Street Performance Belt Tensioners are the strongest and most reliable on the market that we guarantee our product for life against bending or breaking under normal use.
Contact us today with any questions regarding this product!
